Bell satellite no signal


  • "No Satellite Signal" - What to do
  • Worried about losing your TV signal? This is how to keep your satellite dish clear
  • Do Trees Block Satellite & TV Signals & what can I do About it?
  • My TV says ‘no signal!’
  • How do I connect my DVD player to my bell satellite receiver?
  • TV Says NO SIGNAL – What To Check – How To Fix
  • "No Satellite Signal" - What to do

    It is a much discussed topic: do tall or bushy trees block the signal being received by your satellite dish or TV aerial?

    And if so, what can be done to resolve it? The short answer to the first question is yes: trees can indeed be responsible for blocking satellite signals. The good news is that there are things that can be done about it. Certain frequencies can be affected more than others. This is why you can sometimes lose some channels but not others.

    How to prevent trees blocking a satellite or TV signal? There are two main solutions when you need to prevent a satellite signal being blocked, both of which involve creating a clear line of sight for the signal. Move the satellite dish or TV aerial The first solution is to relocate the satellite dish or aerial further away from the tree, on the other side of it, or above it.

    This is the only solution if you are unable to cut back or cut down the tree. Some trees are subject to Tree Preservation Orders TPOs , in which case you will be unlikely be able to remove the tree altogether. You can apply to the local authority for permission to prune it, but be aware that this will take several weeks to be granted.

    If you do go ahead and prune a tree that is subject to a TPO without first gaining permission, then this will be considered an offence under Section or of the town and Country Planning Act Remove or cut back the tree The second solution is to remove the tree, or pollard it to reduce the canopy so that the volume of leaves is reduced.

    Again, tree removal is only an option where there is no TPO in place, and you may only carry out pollarding under a TPO with written permission from the local authority.

    If there is no TPO in place and the tree is located on your own land, then you will usually be able to go ahead and either remove it, or prune it back. Your satellite or TV aerial installation engineer will usually be equipped with technology that allows them to identify precisely what is blocking your signal, right down to the specific tree or trees or even particular branches.

    Whilst you will be keen to remove the branches of the tree that are causing you problems in watching TV, you will no doubt wish to ensure the health and aesthetic appearance of your tree is maintained. Randomly hacking off branches, especially at times of the year when tree pruning is not advised or using the wrong methods, could permanently damage the tree. A qualified tree surgeon will ensure the tree maintains a balanced appearance and is safe and healthy. Tree removal is also best carried out by experienced tree surgeons.

    It is a process that requires expertise in working at height, and the correct qualifications and insurance are vital from a health and safety perspective. Unfortunately, being a TV licence holder or TV or satellite subscriber does not give you any right to a television or radio signal, it merely allows you to own and use a receiver. Unfortunately there are no legal steps that can be taken to deal with a signal that is being blocked by a tree on neighbouring land.

    You can however discuss the matter amicably with your neighbour. However, before you do so, you should check whether it is actually the trees that are responsible for the signal problem. Imagine if you entered into discussions with your neighbour, alleging that their trees were preventing your enjoyment of the TV, only to find that in fact there was in fact something wrong with your satellite dish or TV aerial or the way they have been set up?

    That could be very embarrassing! It is therefore advisable to call in an approved satellite or TV aerial expert to assess the situation before taking any action. They may well tell you that the problem is down to the trees. If they do, it is a good idea to ask them for a written statement explaining that fact so that you can show it to your neighbours. Being a TV licence holder does not give you any right to a television or radio signal.

    Will a signal amplifier or larger satellite dish improve my signal? Signal amplifiers or larger dishes have their uses, but unfortunately they make no difference in situations where a tree is blocking the signal. The only effective solutions are the two outlined above. What to do about a blocked satellite or TV signal? If you are suffering problems with your satellite or TV aerial signal and you believe that trees may be responsible, take professional advice, first from a satellite or aerial professional, and then if they confirm the problems are down to the trees, talk to a qualified tree surgeon about how best to go about dealing with the issue.

    Ideally if possible, get both professionals to liaise with each other for best results. TH Trees Ltd can assist with tree pollarding, pruning or tree removal to help you get your TV signal back up and running. We often work alongside satellite and TV aerial engineers with a view to getting the desired results.

    For a free consultation and no-obligation quotation, and helpful advice from our qualified experts, please get in touch.

    Worried about losing your TV signal? This is how to keep your satellite dish clear

    To check for reception problems, consider the following: Is the satellite dish or UHF aerial positioned correctly? Re-positioning a satellite dish or TV aerial can be a challenge, and can be dangerous, too — many people have lost their lives in the pursuit of better TV reception.

    If you think you need to adjust your aerial or satellite dish, we recommend that you contact the company that supplies your TV package to seek their advice. Has the antenna or the cable corroded? Rain and humidity can damage outdoor aerials, while commonplace wear-and-tear can cause damage to indoor cables.

    Check that the cables and aerials look clean and rust-free and that cables are firmly secured to your television set.

    Is the channel airing? You might get no signal on the TV when a TV channel has gone off-air. Just change the channel to see if this is the case! Setting problems Is the TV set on the correct input? Simply cycle through your inputs using your remote control, or by pressing buttons on the television set, until you reach the right one.

    Reset the box To reset your TV set and all related equipment fully, follow these steps: Turn everything off at the wall. Check that all cables are securely and firmly in place.

    Wait for 60 seconds. Plug your TV box not the television set in and turn it on. Wait another 60 seconds, or until the lights on the TV box have stopped flashing. Plug everything else back in and turn it all back on. Not fixed? Did you know we offer a very popular TV warranty cover designed at protecting you if emergencies occur?

    Just get in touch with us on or visit our website to send an email or speak with our chat team. Guess what if you are looking for a best gas boiler cover so you dont need to worried about it because we have a wide range of boiler cover for homeowners and landlords. Our technical team can run you through some simple troubleshooting tips to try and fix it over the phone — but if not we have a dedicated team of manufacturer engineers just waiting to come and help you fix your TV.

    If in doubt, seek professional assistance.

    It is a much discussed topic: do tall or bushy trees block the signal being received by your satellite dish or TV aerial? And if so, what can be done to resolve it?

    The short answer to the first question is yes: trees can indeed be responsible for blocking satellite signals.

    Do Trees Block Satellite & TV Signals & what can I do About it?

    The good news is that there are things that can be done about it. Certain frequencies can be affected more than others. This is why you can sometimes lose some channels but not others. How to prevent trees blocking a satellite or TV signal? There are two main solutions when you need to prevent a satellite signal being blocked, both of which involve creating a clear line of sight for the signal.

    Move the satellite dish or TV aerial The first solution is to relocate the satellite dish or aerial further away from the tree, on the other side of it, or above it.

    This is the only solution if you are unable to cut back or cut down the tree. Some trees are subject to Tree Preservation Orders TPOsin which case you will be unlikely be able to remove the tree altogether.

    My TV says ‘no signal!’

    You can apply to the local authority for permission to prune it, but be aware that this will take several weeks to be granted. If you do go ahead and prune a tree that is subject to a TPO without first gaining permission, then this will be considered an offence under Section or of the town and Country Planning Act Remove or cut back the tree The second solution is to remove the tree, or pollard it to reduce the canopy so that the volume of leaves is reduced.

    Again, tree removal is only an option where there is no TPO in place, and you may only carry out pollarding under a TPO with written permission from the local authority. If there is no TPO in place and the tree is located on your own land, then you will usually be able to go ahead and either remove it, or prune it back. Your satellite or TV aerial installation engineer will usually be equipped with technology that allows them to identify precisely what is blocking your signal, right down to the specific tree or trees or even particular branches.

    Whilst you will be keen to remove the branches of the tree that are causing you problems in watching TV, you will no doubt wish to ensure the health and aesthetic appearance of your tree is maintained.

    Randomly hacking off branches, especially at times of the year when tree pruning is not advised or using the wrong methods, could permanently damage the tree. A qualified tree surgeon will ensure the tree maintains a balanced appearance and is safe and healthy. Keep in mind that spraying water at your satellite dish comes with the risk of getting water into and possibly damaging internal components. Your satellite dish is made to shed water falling from the sky, not shooting up from below.

    To remove ice from your satellite dish Gently applying warm water is the best method for removing ice from a satellite dish. Do not use ice scrapers or tools to chip at the ice as you may damage the surface or knock the dish out of position. Moving it just a bit can mean the difference between a strong signal and no signal at all. If you can safely access the dish, apply a light stream or coating of warm water until the ice melts.

    An empty spray bottle usually works best.

    How do I connect my DVD player to my bell satellite receiver?

    Avoid pouring water on your satellite dish or hosing it down with the garden hose. The best way to avoid snow and ice satellite signal interference is to prevent it from accumulating in the first place. How to prevent snow and ice accumulation on your dish Modern satellite dishes are designed to shed snow and ice, but accumulations can still happen, especially in regions prone to heavy wintry weather. In these areas, accessorizing your dish with heaters or covers will help keep it clear of snow and ice all season long.

    Satellite dish heaters Dish heaters, like the HotShot satellite dish heaterkeep the surface of your dish above freezing temperatures. Most dish heaters do not require professional installation. Satellite dish covers Most dish covers are made of a fitted nylon material which creates a surface too smooth for significant snow and ice accumulation. Though less effective than dish heaters at keeping snow and ice from accumulating, dish covers are easy to install — just slip it over the dish like a big sock — and they are cheaper than most dish heaters.

    TV Says NO SIGNAL – What To Check – How To Fix

    Will cooking spray or Rain-X help prevent snow and ice accumulation? Non-stick cooking and waterproofing sprays such as PAM or Rain-X are not recommended for keeping snow and ice off your satellite dish. These sprays can actually make it more likely to accumulate dirt and pollen, which then creates an ideal surface for snow and ice to accumulate.

    Furthermore, these chemicals could damage the surface of the dish. Will shielding my satellite dish from the rain keep the signal from going out? Not likely. Water can refract satellite signals anywhere along the path between the satellite in the sky and your dish.

    Remember safety first when cleaning your dish Only clean or clear off your satellite dish when it is absolutely necessary and you can do it safely.

    If the risk is too great, wait until you can safely access the dish or have someone come out to service it.


    thoughts on “Bell satellite no signal

    Leave a Reply

    Your email address will not be published. Required fields are marked *