Download chirp ham


  • Programming Your Baofeng Radio with Chirp and Solving the Prolific Driver Issue
  • How Program a Baofeng UV-5R with CHIRP Software
  • How to install Chirp on Ubuntu 20.04
  • CHIRP on Raspberry Pi OS & AntiX Linux
  • Programming
  • CHIRPing a Baofeng
  • How to program a Ham radio with CHIRP software
  • Programming Your Baofeng Radio with Chirp and Solving the Prolific Driver Issue

    The goal: channels and settings, what to save, and backups Common types of contacts you want to have saved in your radio: Direct contacts like family members, friends, coworkers, or your prepper group Local repeaters, which are special ham stations that rebroadcast messages over wider areas Weather stations, like the always-on NOAA weather alerts Local first responders, such as police, fire, and EMS FRS and GMRS frequencies, so you can talk with people on those style of radios eg.

    But instead of remembering Each entry is saved in a channel. The word is used for the same reason as television channels, which, back in the day, were each associated to a frequency. So instead of remembering that NBC was on Saving your preferred frequencies in channels also makes it easy to scan on your radio. Just hit the scan button and the radio will continually cycle through your list of saved channels until it finds something with activity.

    You can easily create backups on your computer, cloud storage, or USB drives. There are many reports of errors with cheaper knockoff cables, so try to buy authentic cables from the manufacturer. The extra few dollars are worth it.

    A common error is not seating the plugs all the way into the holes. You should feel an obvious click once the cable is fully engaged. In our testing, the driver installed automatically in Windows The driver was already pre-installed on macOS and Arch Linux Arch is a barebones Linux version, so it should also be pre-installed on more-popular Linux distributions like Ubuntu and Fedora.

    The FTDI driver provided by most operating system vendors will not work with counterfeit chips. Windows Download the Windows installer , open it, and click through the usual Windows prompts. Green highlight, bottom of list. The first time you launch it, you need to Control-click the app icon and choose Open. It may also show up in whatever program launcher you use. The installation is straightforward enough, but you might get a permissions error. General tips You can do most of these tasks just on the computer without the radio plugged in or turned on.

    The cable talks with the radio through audio tones. So whenever doing this work, make sure your radio is tuned to a quiet frequency with no noise coming through even with the volume at max. We suggest removing the antenna from the radio before connecting it to your computer. Imagine you start off with only five personal contacts. Instead of starting the repeaters on Channel 6, you could leave empty and start the repeaters at Channel This is all just personal preference, though.

    You might have already saved Channels , but when you go to import another chunk of channels, the import screen will show the first line at Ch 1, the next as Ch 2, and so on. Examples below. A dialog box will appear prompting you to choose your port, radio vendor, and model. The port, however, is a bit trickier. You should first look for a port with USB somewhere in the name. Click download. If the process fails, try another port.

    Move through all the prompts and warnings that appear. These are common warnings in this kind of community-driven software. After a few seconds, a table will appear listing the frequencies programmed into your radio. Just start the process over again. In our experience, problems pop up in the initial handshake between the computer and radio.

    Within each tab, radio frequencies appear in a table. Experienced Hams should recognize many of these settings, but a few key columns require an explanation for beginners: Loc: The channel number assigned to each frequency. Loc 0 will be Channel 0 on your radio, Loc 10 will be Channel 10, etc.

    Note that your radio only has so many available channels you can program. Frequency: The actual frequency assigned to each channel. Duplex: Lets you fiddle with transmission settings, and is a whole topic in and of itself.

    Skip: Setting Skip to S will make it so that the radio will automatically skip over that frequency when scanning. For example, if you lose your radio but replace it with the same model, you just use that image file and everything about the new radio will be like the old one. But those images are specific to the radio model since they touch things like radio-specific settings.

    Saving just your address book is slightly different. That comes in handy when you have multiple models in your family or prepper group. Those address-book-only backups are explained in the last section. There are a few menu items for importing frequency presets.

    Across the entire radio spectrum, most preppers end up using frequencies in just two chunks of the spectrum: 2m and 70cm. But if you are just trying to call out into the void looking for random connections, which specific frequency would you use? Next, look at the To column. In the above example, channel two is the 2m Call, and channel four is the 70cm Call. In the above example, CHIRP would create channels two and four but skip over channels zero, one, and three. To fix the channel numbers, look to the bottom of the dialog under Adjust New Location.

    Alternatively, you can double-click the number for the channel under the To column to set it manually. The advantage of using the buttons under Adjust New Location is that it will update all the channel assignments in one go. You only want to use Auto for the first frequencies you import into a blank address book. You then go to import a batch of 14 frequencies, such as the weather examples below.

    So make sure Duplex is Off on all of your weather frequencies. Tell your radio to skip scanning those stations by putting S in the Skip column. And since the weather stations are always broadcasting, your scan will get stuck there. If you accidentally set Skip on the wrong station, click the S and choose the blank gray block above the S. This will turn off Skip for that channel.

    Many repeaters require special settings, such as a frequency offset since they usually listen on one frequency and transmit on another and a PL tone. Not only does CHIRP let you enter frequencies, offsets, and PL tones manually, but it can directly import frequencies from popular online repositories to make programming a snap.

    You might notice that the Ham repeaters have some extra settings in the columns, such as tone and offset.

    These are crucial for being able to transmit to the repeater. Adding emergency and first responder frequencies There are two types in this bucket: Standard frequencies that people can use to call for help. Similarly, most boaters know that Channel 16 is the universal call-for-help channel on marine radios. The specific frequencies used by your local responders, such as police and fire.

    Wikipedia lists several international distress frequencies that are good to know and have programmed in your radio. Here are just a few: 2-meter calling frequency is Marine VHF channel 16 FRS channels 1, 3, and The prepping community has made various attempts to create their own agreed-upon universal channels.

    Programming your local first responder frequencies can get complicated. You can manually browse websites like RadioReference and copy-paste the info over. There are databases with this info that can be imported directly into CHIRP, namely from RadioReference com , but you must have a registered account and purchase a premium subscription to import those frequencies directly.

    Feel free to sign up with RadioReference. Input your real username, password, and ZIP Code. Maybe your kid grabs a radio and decides to play cops and robbers. To prevent outbound transmissions, set the Duplex column to Off.

    Python is a programming language. Linux Things are a bit dicier on Linux since every distro is different. In Arch Linux, these commands could work: sudo pacman -S python2-pip pip2 install suds pip is a package manager for Python modules.

    FRS is essentially meant for walkie-talkies. Transmitting on those frequencies from a normal Ham radio is technically illegal. However, in an emergency, you may want to have as many frequencies available to you as possible, and the FCC rules let you transmit on any frequency in the event of a life-or-death-emergency. This time, all of them should work with your radio. If you have empty channels left over, you can add more if you like, such as marine bands or MURS channels.

    Look for the Settings tab. To return to viewing your channel list, click Memories, just above the Settings tab. An example customization some people like to make through these settings is how the channel labels are displayed on the screen. You could display the human-friendly name eg. Instead of having both rows using the same labeling scheme, you can set one row to use one method and the other row to use a different one.

    How Program a Baofeng UV-5R with CHIRP Software

    There are a variety of hand held radios on the market. One of the most prolific manufacturers is a Chinese company who makes very inexpensive some might even say cheap radios marketed under the names of Baofeng and BTech.

    Another popular maker along these lines is Wouxun. It has versions for Windows, Mac, and Linux, although for this article we are going to focus on Windows. Now if you were like me, and installed CHIRP, plugged in the cable, and hooked it to your radio, you probably got a lot of error messages.

    Inside the programming cable are some chips that help the computer talk to the radio. The company who originally created these chips was called Prolific. These Chinese companies cloned the chips and their code, indeed the cables even report to Windows that they are from Prolific. Which is where the problems start.

    Prolific was naturally a tad upset that someone had stolen their design, and who can blame them? You can verify this for yourself. If you are on an older version of Windows you can open up Device Manager through the Administration panel.

    Note that it has a big yellow exclamation mark. Right click on the Prolific driver and pick Properties. Right in the middle under Device Status we see the problem: This device cannot start.

    Code The solution then is to install the most recent version that works. Fortunately someone has made that very easy to do. In addition, they have a tiny program you can download and install that will uninstall the nonfunctional version of the Prolific driver, and install the last version that actually worked. Even more important, their app will prevent Windows from automatically updating the driver in the future. Note they have versions of their program for both the 32 and 64 bit versions of Windows, and it will run on Windows XP, 7, 8, 8.

    Just download and run, reboot, then return to Device Manager. Your Prolific driver should now appear without the exclamation mark, indicating it is now working. Open up CHIRP, then plug in your cable, and with the radio off plug it into your radio, and then turn the radio on.

    CHIRP opens up with a big blank screen. Next it wants to know what COM port the cable is using, who made the radio, and what model. I also want to add a quick note for eagle eyed viewers. Again you can use device manager, like I did, to determine what the correct COM port is for your computer, and if you use multiple computers your COM port may be different on each.

    Once done just click OK. Next you are shown a warning message. Next you will see a reminder on how to hookup your radio. Basically, turn the radio off, hook it to the computer using the cable, then turn it on. Once you click OK, it will start transferring the data. Click on the image below, or any of the images in this article, to open up a bigger version.

    The first thing you should do is save what is there by using the File, Save menu option. This will save it as an IMG file.

    I generally use the radio vendor, then model, then the area where the frequencies are for. After that I put the date I created the file. This lets me track changes over time, or go back to an older version if I need to. Now you are ready to start entering frequencies. You can of course do it manually, typing each row supplying the data. There is a list of multiple sites you can import from, each will let you search on a variety of things like your state, county, or zip code to find frequencies near you.

    Just be sure your cursor is sitting on empty row in the frequency list or else you may overwrite some of your existing frequencies. The final option is to copy from an IMG file a friend with a similar radio has sent you.

    You can copy just some of the rows or their entire frequency list. If you look to the very left, there are two tabs.

    The Memories tab is what you are currently on. Now click on the Settings tab. The overwhelming majority of settings you should leave alone unless you have a specific need. However there are a few you may wish to look at. Do note these are for the Baofeng, what you see on the Settings tab will change with each radio type.

    This indicates what is shown on the display. Your choices are Name, Frequency, and Channel. I tend to prefer Name as it shows the name such as the repeater call sign , but you could alternately show the frequency of the repeater. But more on uploading in a moment. The other thing on for this radio you might want to look at is the background color for the display, this Baofeng can have three different background colors, and you can set the Standby, Receive RX and Transmit TX colors independently.

    Just for fun I use the different colors but use what works for you. You can also enable or disable the Roger Beep using the check box at the bottom. Most hams find the beep annoying, so I suggest turning it off unless you are doing a lot of Simplex work. Next click on the Advanced Settings.

    By default it is set to English. Not only do I find this annoying, it also slows down the operation of the radio. I use the drop down to change this to OFF, but again it should be your preference. As a final step in my setup process I click on the Other Settings tab.

    This way when you turn on your radio, it displays the call sign of the owner. There are several other tabs but these are really advanced items that I leave alone.

    From the Radio menu, pick Upload To Radio. You are first prompted for the COM port, the vendor, and the Model. Once you click OK, you are given the reminder to turn off the radio, hook it up, turn the radio on, and click OK. After clicking OK you may see the message about it being an experimental driver, just click Yes to proceed. You are ready to start using your radio, just remember to unhook it from the programming cable before you try to use it.

    Conclusion The steps in this article should work for most radios, especially the critical steps at the beginning for fixing your Prolific driver. I want to remind you the Memories layout and Settings pages will be different for each radio, even radios from the same vendor. Some manufacturers, for example, allow additional information in the memory columns such as geographic location. Others may not have multiple LED colors for the display. With the information in this article though you should be able to navigate setting up most of the radios that CHIRP supports.

    Share this:.

    How to install Chirp on Ubuntu 20.04

    Note that it has a big yellow exclamation mark. Right click on the Prolific driver and pick Properties. Right in the middle under Device Status we see the problem: This device cannot start. Code The solution then is to install the most recent version that works. Fortunately someone has made that very easy to do. In addition, they have a tiny program you can download and install that will uninstall the nonfunctional version of the Prolific driver, and install the last version that actually worked.

    Even more important, their app will prevent Windows from automatically updating the driver in the future. Note they have versions of their program for both the 32 and 64 bit versions of Windows, and it will run on Windows XP, 7, 8, 8.

    CHIRP on Raspberry Pi OS & AntiX Linux

    Just download and run, reboot, then return to Device Manager. Your Prolific driver should now appear without the exclamation mark, indicating it is now working. Open up CHIRP, then plug in your cable, and with the radio off plug it into your radio, and then turn the radio on.

    CHIRP opens up with a big blank screen. Next it wants to know what COM port the cable is using, who made the radio, and what model. I also want to add a quick note for eagle eyed viewers.

    Again you can use device manager, like I did, to determine what the correct COM port is for your computer, and if you use multiple computers your COM port may be different on each. Once done just click OK.

    Next you are shown a warning message. Next you will see a reminder on how to hookup your radio. Basically, turn the radio off, hook it to the computer using the cable, then turn it on. Once you click OK, it will start transferring the data. Click on the image below, or any of the images in this article, to open up a bigger version. The first thing you should do is save what is there by using the File, Save menu option.

    This will save it as an IMG file. I generally use the radio vendor, then model, then the area where the frequencies are for. After that I put the date I created the file.

    Programming

    This lets me track changes over time, or go back to an older version if I need to. Now you are ready to start entering frequencies. You can of course do it manually, typing each row supplying the data.

    There is a list of multiple sites you can import from, each will let you search on a variety of things like your state, county, or zip code to find frequencies near you. Just be sure your cursor is sitting on empty row in the frequency list or else you may overwrite some of your existing frequencies.

    The final option is to copy from an IMG file a friend with a similar radio has sent you.

    CHIRPing a Baofeng

    You can copy just some of the rows or their entire frequency list. If you look to the very left, there are two tabs. The Memories tab is what you are currently on. Now click on the Settings tab. The overwhelming majority of settings you should leave alone unless you have a specific need. However there are a few you may wish to look at. How do I download Chirp software? Choose the appropriate folder for your operating system.

    How do I install a Windows chirp? Press [BAND] for the frequency band. Enter the frequency. Assign the frequency to a channel. Can Baofeng radios be tracked?

    The Baofeng is like any other radio and can be tracked when it is transmitting. When it is only receiving, it is like any other device that receives a radio signal and cannot be tracked. Are Baofeng radios illegal? Can Baofeng talk to CB? Even if software modified and programmed, it would not be able to transmit nor receive anything. Why are Baofeng radios so cheap?

    How to program a Ham radio with CHIRP software

    One of the reasons the Baofeng UV-5R radios may be so inexpensive is they are not aimed at a specific Niche, therefore they save money on big advertisements and promotions like the ham radio equipment manufacturers like Yaesu Icom and kenwood.

    They also do not test and advance any technology. Why are Baofeng radios illegal? Also, it is perfectly legal to transmit on ham frequencies without a license in an emergency. Can I use my Baofeng as walkie talkie? Are Baofeng radios legal in UK? Yes, if you have a licence.


    thoughts on “Download chirp ham

    Leave a Reply

    Your email address will not be published. Required fields are marked *