Excavator komatsu pc 200 6


  • Komatsu PC200-6 Error Codes or Fault codes on the Monitor
  • Komatsu 200 6 what batteries and size. Komatsu pc200 excavator specifications
  • Scissors with replaceable jaws multiprocessor Universal scissors Telescopic handle Quick change device attachments quick coupler We have also prepared an extended list of additional equipment for this model, which you can find on this page in the "Additional options" tab! This machine is produced Chinese manufacturer special machines Komatsu.

    In this model of the excavator, the manufacturer has implemented a large number of modern technologies and innovative ideas, which allowed the machine to become the sales leader in the international market. In order to reduce toxic emissions and diesel fuel consumption, the machine uses several special mechanisms.

    To increase the digging power, effort and service intervals, special automatic mechanisms were also installed to adjust these parameters automatically, depending on the type of work being done. In addition, the design of Komatsu uses materials that are optimal for recycling, which ensured easy disposal of parts. The name of the machine indicates the operating weight, namely the numbers make it clear that the excavator weighs 20, kilograms. At the rear of the turntable is a six-cylinder diesel power unit developing a maximum power of Horse power or This engine has a turbocharging system and an intercooler.

    In order to exclude frequent malfunctions or damage to expensive injectors due to low-quality fuel, a filter-drier was installed in the fuel system. Appointment The Komatsu PC excavator is designed exclusively for the construction of any objects, including road sections.

    This excavator is used for almost all construction purposes, namely, it is capable of doing not only excavation work, which includes digging trenches and pits, but also dismantling. This is due to the presence of special attachments either a hydraulic breaker or hydraulic shears that can handle concrete, rebar and other similar materials.

    Also, this technique, thanks to a fairly extensive set of buckets, can perform leveling work, which is a fairly frequent process in construction and industry. Drilling work can also be done with this excavator, since, in addition to buckets and dismantling tools, it can also use special hydraulic drilling equipment, which makes it possible not to resort to the use of other equipment, if, of course, such equipment is available and installed on the machine.

    Attachments As described above, the Komatsu excavator is an indispensable machine in the field of construction work, because of its versatility. And for good reason, because this machine can use a variety of attachments designed for a particular process. The list of these auxiliary units includes the following type of equipment: Digging bucket. It is a standard unit of this excavator and is designed for digging pits and trenches.

    It can also be used for loading or moving over short distances of various bulk materials in their structure. Has several teeth, usually no more than six. There are several versions, differing in size and number of teeth. Fits to the handle without a special adapter. Grading bucket. This equipment is small and has no teeth. The main purpose of this bucket is to perform leveling work.

    There are also several versions that differ in volume and size. Hydraulic breaker. It is one of the main tools for demolition work. Able to cope with both concrete and reinforced concrete structures. Hydraulic shears. Just like the previous equipment, it is one of the main units used in the dismantling of any objects. In addition to the destruction of concrete and reinforced concrete structures, it can also be used for the dismantling of railways, since the force of this equipment makes it possible to bite the rails.

    For more precise work, the scissors are equipped with a rotator that allows you to select the required angle. Installed to the handle using a special adapter. Drilling equipment.

    This type equipment is not used as often as previous units, but you can still find it. This unit is intended for drilling soil of different structure. Loosening equipment. It is an indispensable equipment when working on rather dense ground. There is only one version of this unit, namely this single-tooth type.

    Of course, the Komatsu excavator has a wide range of various attachments, but some units were not included in this list, since all of the above are commonly used equipment. Modifications The Komatsu PC excavator has no modified versions, there are only several generations of this model. This model differs from the basic excavator in technical characteristics, including overall dimensions.

    In length, the car has become much larger, this is due to the elongated tracks, which is exactly what the abbreviation LC indicates in the model name.

    A hp diesel power unit is installed on the turntable at the rear, equipped in the same way as in basic excavator , turbocharging system. But it is worth noting that this unit is slightly weaker than the base unit, but this does not in any way affect the work. Of the available functions, attention should be paid to the new fuel saving system, which saves up to 20 percent in diesel fuel. The whole point of this option is as follows: if, after work, the levers responsible for the movement of the machine and the operation of the attachment were transferred to the neutral position, then the number of crankshaft rotations will automatically be reduced to medium speed.

    But if the levers are inactive for four seconds, the system will automatically switch the engine to idle, but after changing the position of the levers, the engine will be put back into normal operating mode. Specifications In a fully operational state, the Komatsu excavator weighs 19, kilograms, but this takes into account the mm track shoes. The machine can be equipped with wider shoes for increased flotation. Well, and mm shoes, with which the excavator has a mass of 19, kilograms and a specific pressure of On the standard mm shoes, the Komatsu excavator exerts a specific ground pressure of The excavator has a length of millimeters, when the length along the supporting surface is millimeters.

    The height of the machine to the highest point of the boom is 2, millimeters when the cab height is exactly 3, millimeters. The width of the excavator is millimeters. The ground clearance calculated under the counterweight is 1, millimeters. The minimum ground clearance is millimeters. The turning radius of the rear platform has a value of millimeters. The reference length of the track is millimeters when the overall length is millimeters.

    The track spacing is millimeters. The track width is millimeters. The lug height is 26 millimeters. The height of the cabin itself is millimeters, and its width is millimeters. The machine platform can rotate at a speed of 12 revolutions per minute. The standard earthmoving bucket has a volume of cubic millimeters. The maximum allowable dumping height is approximately millimeters. The maximum depth is millimeters. The maximum radius is millimeters, while the minimum is millimeters.

    The excavator equipment has a lifting capacity of up to kilograms. The hydraulic system holds liters of fluid. A hydraulic system pump is installed, the capacity of which reaches liters of fluid per minute. The fuel tank can hold up to liters of fuel. The cooling system tank has a volume of 20 liters. Peculiarities The Komatsu PC excavator is a highly reliable and productive machine with a large number of modern technologies and innovative ideas.

    The main feature of this excavator is a special system with which it is possible to achieve diesel fuel savings of up to 20 percent by automatically switching the engine to idle. This occurs if the control levers of both the machine and the equipment are in neutral for more than four seconds.

    There is also a system for automatic adjustment of power, speed and effort when digging, which also affects fuel economy during operation. For ease of maintenance, several special handrails and anti-slip pads were installed in the engine compartment on the upper platform, which ensured safe movement.

    There is also easy access to the power unit and all necessary filters, thanks to the hatches located on the sides of the excavator platform. It is worth noting that thanks to this, you can get to the rest of the important mechanisms and systems. Noise-insulating porous materials are used in the cab, which can significantly reduce the noise level during operation.

    This, in turn, provides a comfortable working environment for long periods of work. A fairly large glazing area provided a large all-round view from the workplace. It is also worth paying attention to the fact that in the cab of this excavator there is a locking system for levers and other controls, which prevents accidental pressing when entering the cab.

    Before starting work, you should check whether the lever of this system is in a horizontal position, if not, then move it. This power unit is equipped with a turbocharging system that allows for more performance from the engine exhaust gases. The maximum achievable power, marked on the flywheel, is The diameter of each cylinder is millimeters.

    The piston stroke has a value of millimeters. The total volume of all cylinders is cubic millimeters. The maximum permissible crankshaft speed is rpm. There is an intercooler that cools the air before it enters the engine Price new and used This machine is a rather expensive piece of equipment and currently has a cost of five million to six million Russian rubles.

    The price of a new excavator varies depending only on the year of manufacture and the installed working equipment. The cost for a used excavator is slightly less, as it depends mainly on its operating time. For example, if a car has worked for about a thousand engine hours, then it is available for sale at a price of four million to five million Russian rubles.

    And if more than five thousand engine hours have been passed, then the price will vary from three million to four million Russian rubles. Of course, not only the operating time affects the cost, but also the year of production, the available attachments and the technical condition of the machine.

    In general, the excavator alarms are displayed on the monitor in the form of fault codes PC Although you can find a professional repairman or repair factory to troubleshoot problems, it also need time to test; if there is no professional tool, it will take a lot of time to troubleshoot. So understanding the meaning of these fault codes is important to you. You can follow the prompts to eliminate the problem, saving time and cost.

    This article will introduce the main fault codes of the PC Some the fault codes are also applicable to other PC-6 excavators, even PC-7 excavators. E03, rotary parking brake system. Komatsu PC Service code need to switch operation code: E The fault history is abnormal. E, The clock data is abnormal. E, Buzzer output short circuit, buzzer drive harness and 24V power line contact.

    E, Air filter is blocked. E, Wiper motor drive forward rotation system short circuit new. E, Wiper motor drive reverse system short circuit new. E, The sprayer drive circuit is shorted new. E, LS select solenoid circuit short circuit. E, Short circuit of the rotary parking brake solenoid valve circuit. E, The secondary overflow solenoid valve circuit is short circuited.

    E, The walking speed conversion solenoid valve circuit is short-circuited. E, Fast mode solenoid valve circuit short circuit. E, Fast mode solenoid valve circuit is open. E, The rotary parking brake solenoid valve circuit is open.

    E, The secondary overflow solenoid valve circuit is open. E, Mode selection input fault. E, The network responds to a timeout failure. E, The front pump pressure sensor circuit is abnormal. E, The rear pump pressure sensor circuit is abnormal. E, The pressure sensor circuit power supply is abnormal. E, Engine speed sensor is abnormal. E, The activation mode slewing solenoid valve circuit is short-circuited. E, Front pump TVC solenoid valve circuit short circuit old model.

    E, The front pump TVC solenoid valve circuit is broken old model. E, Activation mode swing solenoid valve circuit is open. E, Rear pump TVC solenoid valve circuit short circuit. E, Rear pump TVC solenoid valve circuit is open. E, The rotary stroke control solenoid valve circuit is short-circuited. E, The rotary stroke control solenoid valve circuit is open.

    E, The feedback potential circuit is abnormal. E, Fuel dial input is abnormal. E, Automatic grease supply controller failure optional. E, Battery relay output circuit is short circuited. E, Governor Motor is out of adjustment. E, Governor motor circuit is open. E, The governor motor circuit is short circuited.

    Of course, the above description is not exhaustive to the cause of the failure for PC error codes. If you want to understand the exact reason of the above failure and its troubleshooting; you can contact us directly sales excavator-parts. We will provide relevant solution service. Welcome to your contact. About the Author: mark mou Related Posts.

    Komatsu PC Service code need to switch operation code: E The fault history is abnormal. E, The clock data is abnormal. E, Buzzer output short circuit, buzzer drive harness and 24V power line contact. E, Air filter is blocked. E, Wiper motor drive forward rotation system short circuit new.

    E, Wiper motor drive reverse system short circuit new. E, The sprayer drive circuit is shorted new. E, LS select solenoid circuit short circuit. E, Short circuit of the rotary parking brake solenoid valve circuit. E, The secondary overflow solenoid valve circuit is short circuited. E, The walking speed conversion solenoid valve circuit is short-circuited. E, Fast mode solenoid valve circuit short circuit.

    E, Fast mode solenoid valve circuit is open. E, The rotary parking brake solenoid valve circuit is open. E, The secondary overflow solenoid valve circuit is open. E, Mode selection input fault. E, The network responds to a timeout failure.

    Komatsu PC200-6 Error Codes or Fault codes on the Monitor

    E, The front pump pressure sensor circuit is abnormal. E, The rear pump pressure sensor circuit is abnormal. E, The pressure sensor circuit power supply is abnormal.

    E, Engine speed sensor is abnormal. E, The activation mode slewing solenoid valve circuit is short-circuited. E, Front pump TVC solenoid valve circuit short circuit old model.

    In this model of the excavator, the manufacturer has implemented a large number modern technologies and innovative ideas, which allowed the car to become a sales leader in the international market. In order to reduce toxic emissions and consumption diesel fuel The machine uses several special mechanisms.

    To increase the power of digging, efforts and interservice intervals, special automatic mechanisms were also installed, allowing you to adjust these parameters automatically, depending on the type of work done. In addition, in the design of Komatsumaterials are optimal for processing, which ensured not a complex disposal of parts.

    In the name of the machine, the operational mass is indicated, namely the figures make it clear that the excavator has a weight of 20, kilograms. In the back of the turning platform there is a six-cylinder diesel force aggregate Developing maximum power in horse power or This engine has a turbocharging system and an intercooler.

    In order to eliminate frequent problems or damage to expensive nozzles due to poor fuel, a filter-moisture separator was installed in the fuel system. Purpose Excavator Komatsu PC is intended solely for the construction of any objects, including road sections.

    This excavator is used in almost all for construction purposes, namely, it is able to make not only earthmoving work, which includes digging trenches and pitchers, but also to carry out dismantling. This is explained by the presence of special attachments or hydraulic jackhammer, or hydraulic scissorswhich can cope with concrete, reinforcement and other similar materials.

    Also, this technique, thanks to a rather extensive set of buckets, can perform the work of the planning type, which is a rather frequent process in construction and industry. Drilling work can also be made of this excavator, as it, in addition to buckets and dismantling tools, can also use special hydraulic drilling equipment, which allows not to resort to the use of other equipment, if, of course, such equipment is available and installed on the machine.

    Hinged equipment As described above, the Komatsu excavator is an indispensable machine in the construction work, as it has versatility. And no reason, because this car Can use a variety of attachments intended for a particular process. In the list of these auxiliary aggregates The following type variety is included: Earth-racing bucket. It is the standard unit of this excavator and is intended for the digging of buttyans and trenches.

    Also can be used for loading or moving short distances different materials bulk in their structure. It has several teeth, as a rule, no more than six. There are several versions that differ in size and number of teeth. Installed to the handle without a special adapter. Planning bucket. This equipment has a small volume and does not have teeth. The main purpose of this bucket is the work of the planning type.

    There are also several versions, which differ in volume and size. Hydraulic jackhammer. It is one of the main tools intended for making dismantling work. It is able to cope with both concrete and concrete structures. Hydraulic scissors. Just as the previous equipment, is one of the main units applied when dismantling any objects. In addition to the destruction of concrete and reinforced concrete structures, it can also be used when disassembled railways Since the effort of this equipment allows you to snack rails.

    For more accurate work, the scissors are equipped with a rotator, allowing you to choose the desired angle. Installed to the handle using a special adapter.

    Drilling equipment. This type of equipment is applied not as often as previous aggregates, but still can be found. This unit is intended for drilling different under the structure of the soil. Ripper equipment. It is an indispensable equipment when working on a rather dense soil. There is only one version of this unit, namely this alone type. Of course, the Komatsu excavator has a wide range of diverse attachments, but some units did not fall into this list, since all of the above is frequently used equipment.

    This model differs from the basic excavator with technical characteristics, including overall values. In length, the car has become much larger, it is explained by the elongated tracks, which the abbreviation LC speaks about the model name.

    On the rotary platform in the back of the rd strong diesel power unit, equipped as well as in basic excavatorturbocharging system. But it is worth noting that this unit is a little weaker than the basic, but this does not affect the work. Of the available functions, it is necessary to pay attention to the new fuel economy system, which allows you to save up to 20 percent of diesel fuel. The whole essence of this option is as follows: if after work the levers responsible for the movement of the machine and the operation of mounted equipment, were translated into a neutral position, the number of rotations of the crankshaft will automatically be reduced to medium revolutions.

    But if the levers are dudh badam khane ke fayde idle for four seconds, the system will automatically translate the engine to idle mode, well, after changing the position of the levers, the engine will be translated again to normal operating mode.

    Specifications In fully prepared for operation, the Komatsu excavator has a mass of kilograms, but this is taking into account the millimeter caterpillars. The machine can be equipped with greater widths in order to increase passability. In total, there are three meanings, it is millimeters the mass grows up to kilograms, and the pressure rendered to the ground is reduced to Well, millimeter shoes with which the excavator has a mass in kilograms and specific pressure at On the standard millimeter shoes, Komatsu excavator has a specific pressure on the soil in The excavator has a length of millimeters, when the length of the support surface is millimeters.

    The height of the machine to the upper point of the boom is millimeters, when the cabin altitude is exactly millimeters. The width of the excavator is of 2, millimeters. Road clearance, calculated under the counterweight, is millimeters. Minimum ground clearance It is millimeters. The rotation radius of the rear platform has a value of millimeters. The support length of the caterpillar ribbon is millimeters, when the overall length is millimeters.

    The distance between the tracked ribbons is 2, millimeters. Width caterpillar stroke It is millimeters. The height of the primer is 26 millimeters. The height of the cabin itself has a value of millimeters, and its width is millimeters.

    The machine platform can make a turn with a speed of 12 revolutions per minute. Standard landing bucket has a volume of cubic millimeters. The maximum allowable discharge height is approximately millimeters.

    Komatsu 200 6 what batteries and size. Komatsu pc200 excavator specifications

    The maximum depth is millimeters. The maximum radius is millimeters, when the minimum equals millimeters. The equipment of the excavator has a loading capacity of up to kilograms. A hydraulic system pump is installed, the performance of which reaches liters of fluid per minute. The fuel tank is able to accommodate up to liters of fuel.

    The cooling system tank has a volume of 20 liters. Features The Komatsu PC excavator is a highly reliable and productive machine that has a large number of modern technologies, as well as innovative ideas. The main feature of this excavator is a special system with which you can achieve diesel saving up to 20 percent, by automatic switching Engine operation in idling mode.

    This happens if the control levers, both the machine itself and the equipment, are in a neutral position for more than four seconds. There is also a system of automatic power adjustment, speed and effort with digging, which also affects fuel savings during operation.

    For convenience, when servicing in the engine compartment, several special handrails and an anti-slip covering were installed on the top platform, which ensured a safe movement. There is also easy access to the power unit and to all the necessary filters, thanks to the hatches located on the sides of the excavator platform. It is worth noting that due to this you can get to the rest important mechanisms and systems.


    thoughts on “Excavator komatsu pc 200 6

    1. Between us speaking, in my opinion, it is obvious. I recommend to look for the answer to your question in google.com

    2. Unfortunately, I can help nothing. I think, you will find the correct decision. Do not despair.

    3. I am sorry, that has interfered... I understand this question. It is possible to discuss. Write here or in PM.

    Leave a Reply

    Your email address will not be published. Required fields are marked *